Multi-Tech Systems MVP110 - Manual (Page 20)

MultiVOIP Quick Start Guide
20
25. The Description is optional, but can be useful in
associating the channel to the extension. If you want,
enter a description of your local phone number. This
description identifies the phone number you entered in the
previous step.
26. Select the Permit Hunting check box if you want calls to
roll over to a second voice/fax channel on an answering
MultiVOIP 2, 4, or 8-port client MultiVOIP when the first
channel is busy.
Note: The Host MultiVOIP must have a static IP address
that the remote MultiVOIP can reference to obtain a
downloaded copy of the host phone directory database.
27. In the MultiVOIP Identification group, enter the IP
address of the Host MultiVOIP in the IP Address box.
Then obtain the 12-digit Node ID# (0008005xxxxx) from
the ID plate on the back panel of the MultiVOIP and enter
this number in the Ethernet Node ID box. If the ID plate
is missing or damaged, you can also Telnet to the
MultiVOIP and, on the MultiVOIP Telnet Server menu enter
1 to advance to the Main Menu, then enter 3 for System
Information where item 1 is the Ethernet Port Address you
want to enter in the Ethernet Node ID box.