Multi-Tech Systems MVP110 - Manual (Page 24)

MultiVOIP Quick Start Guide
24
Configuring Your ClientMultiVOIPs
If you are installing a MultiVOIP behind a firewall, you need to
add the following UDP ports to your firewall.
900 Signaling Information 5004 RTP Packets
5000 Status Information 5005 RTCP Packets
Refer to your firewall user documentation to enter and open
these ports.
1. Disconnect the PC from the command port of the Host
MultiVOIP and connect it to the command port on the
Client MultiVOIP.
2. Win 3.1 users - from the Program Manager, double-click
the MultiVOIP Configuration icon in the MultiVOIP
Program Group. The main menu displays.
Win95/98/NT/2000 users - from your desktop, click Start |
Programs I MultiVOIP I Upgrade Software. The
following dialog box displays.
3. Click Yes. The IP Protocol Default Setup dialog box
displays.
The default Frame Type is TYPE_II. If this does not