Multi-Tech Systems MVP110 - Manual (Page 4)

MultiVOIP Quick Start Guide
4
Introduction
Welcome to Multi-Tech's stand-alone Voice/IP Gateway, the
MultiVOIP model MVP110. The MultiVOIP enables FXS-only
analog voice and fax communication over an IP network. Multi-
Tech’s new voice/fax gateway technology allows voice and fax
communication to ride, with no additional expense, over your
existing IP network, which has traditionally been data-only. To
access this free voice and fax communication, all you have to do
is connect the MultiVOIP to your telephone equipment, and then
to your existing Internet connection. Once configured, the
MultiVOIP then allows voice and fax to travel down the same path
as your traditional data communications.
The MVP110 has one independent voice/fax channel, a 10 Mbps
Ethernet LAN interface, and a command port for configuration.
System management is provided through the command port
using bundled Windows® software which provides easy-to-use
configuration menus and online Help.
Figure 1. MultiVOIP