Multi-Tech Systems MVP110 - Manual (Page 23)

23
Configure Host MultiVOIP
35. The Save Setup dialog box displays.
Click OK to proceed.
36. After the setup is written to the MultiVOIP, the unit is
rebooted.
37. Verify that the BOOT LED on the MultiVOIP is off after the
download is complete. This may take several minutes as
the MultiVOIP reboots.
38. Win3.1 users - you are returned to your Program
Manager where the MultiVOIP Program Group and
Program Items (Windows icons) display.
Win95/98/NT/2000 users - you are returned to your
MultiVOIP folder which is open and visible on your
desktop.
At this time, your host MultiVOIP is configured. Proceed to the
next section to configure the client MultiVOIPs.