Multi-Tech Systems MT5634ZLX - Manual (Page 16)

16
MultiMobile User Guide
MT5634ZLX/E
9. Once completed, the Add New Hardware Wizard dialog box is displayed indicating that it
has finished installing the driver software.
Click Finish to complete the installation of the network interface card.
10. The Copying Files screen displays indicating that the files are being copied to the system.
When completed, the screen disappears.
11. Remove the driver disk from the floppy drive.
12. To complete installation of all software required by the MT5634ZLX/E, reboot the computer.
NOTE: Before rebooting, you need to ensure that the appropriate networking clients, protocols,
and/or services are present. Go to Control Panel | Network and then to the Configuration tab
to make the appropriate selections.