Fcc part 68 telecom – Multi-Tech Systems MT5634ZLX User Manual
Page 57
57
Appendices
MT5634ZLX/E
FCC Part 68 Telecom
1.
This equipment complies with part 68 of the Federal Communications Commission Rules.
On the outside surface of this equipment is a label that contains, among other information,
the FCC registration number. This information must be provided to the telephone company.
2.
As indicated below, the suitable jack (Universal Service Order Code connecting
arrangement) for this equipment is shown. If applicable, the facility interface codes (FIC) and
service order codes (SOC) are shown.
3.
A FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack which is Part 68 compliant. See installation instructions for details.
4.
The ringer equivalence number (REN) is used to determine the quantity of devices which
may be connected to the telephone line. Excessive REN’s on the telephone line may result
in the device not ringing in response to an incoming call. In most , but not all areas, the sum
of the REN’s should not exceed (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total REN’s, contact the local telephone
company.
5.
If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. But if advance
notice is not practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
6.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications in
order to maintain uninterrupted service.
7.
If trouble is experienced with this equipment (the model of which is indicated below) please
contact MultiTech Systems, Inc. at the address shown below for details of how to have
repairs made. If the equipment is causing harm to the network, the telephone company may
request you to remove the equipment from the network until the problem is resolved.
8.
No repairs are to be made by you. Repairs are to be made only by MultiTech Systems or its
licensees. Unauthorized repairs void registration and warranty.
9.
This equipment should not be used on party lines or coin lines.
10. If so required, this equipment is hearing-aid compatible.
Manufacturer:
MultiTech Systems, Inc.
Trade Name:
MultiMoble
Model Number:
MT5634ZLX/E and
MT5634ZLX/E-T/2
FCC Registration Number:
AU7TAI-31800-M5-E
Ren:
0.7B
Modular Jack (USOC):
RJ11C or RJ11W (Single line)
Service Center in USA:
MultiTech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
(612) 785-3500 Fax (612) 785-9874