Notes for packet driver, Notes for windows for workgroups, Ndis2 driver for windows for workgroups – Multi-Tech Systems MT5634ZLX User Manual
Page 62
62
MultiMobile User Guide
MT5634ZLX/E
Notes for Packet Driver
The following are examples of CONFIG.SYS file for loading System Soft
?
Card Services and
packet driver.
Examples of partial CONFIG.SYS file:
device=c:\cardsoft\ss365sl.exe
device=c:\cardsoft\cs.exe
device=c:\cardsoft\csalloc.exe c:\cardsoft\csalloc.ini
device=c:\tcpip\carden.exe /iop=nnn /irq=n /com=n /mir=n
device=c:\cardsoft\cardid.exe
device=c:\tcpip\lmpd.com
Notes for Windows for Workgroups
After installation of the MT5634ZLX/E card drivers, the system will automatically update both
CONFIG.SYS and AUTOEXEC.BAT for you so that the driver will be loaded upon system start
up. When modifying the two files, the system will make copies named CONFIG.ABO and
AUTOEXEC.ABO in the system’s directory. If the driver of PC Card is not successfully loaded,
replace the two *.ABO file for related file and try to start the system again.
The following are examples of CONFIG.SYS and AUTOEXEC.BAT for loading System Soft?
Card Services and drivers for Windows for Workgroups:
Examples of CONFIG.SYS file:
device=c:\cardsoft\ss365sl.exe
device=c:\cardsoft\cs.exe
device=c:\cardsoft\csalloc.exe c:\cardsoft\csalloc.ini
device=c:\wfw311\carden.exe /iop=nnn /irq=n /com=n/mir=n
device=c:\cardsoft\cardid.exe
device=c:\wfw311\ifshlp.sys
Examples of AUTOEXEC.BAT file:
C:\WFW311\NETSTART
NDIS2 Driver for Windows for Workgroups
1.
Run Windows for Workgroups and click the Network Setup icon in Network group.
2.
In the Network Settings dialog box, click the Networks... button to select the network
operating system.
3.
In the Networks dialog box, check the radio button before Install Microsoft Windows
Network and No Additional Network. Click OK to go back the Network Settings screen.
4.
Click the Drivers... button to select network driver.
5.
In the Network Drivers dialog box, click the Add Adapter... button to enter the Add Network
Adapter dialog box. Select Unlisted or Updated Network Adapter then click OK.
6.
Windows will prompt the Install Driver dialog box. At this time, put the driver diskette into
floppy drive then click OK.
7.
Select the Real mode NDIS2 for... string then click OK.
8.
Follow Windows instructions to complete the installation and exit Windows.
9.
Run INSTALL.EXE from root directory of driver diskette.