Miller Electric 3080 - Manual (Page 19)

OM-2225 Page 15
1 Output Control
2 Power Switch
Place controls as indicated. Only gas/air cir-
cuit is activated when the Power switch is
turned On with Output Control in Gas/Air Set
position.
3
Gas/Air Pressure Adjustment Knob
Pull knob and turn to adjust pressure. Push
knob in to lock setting.
Select desired cutting output with Output
Control.
4-2. Setting Gas/Air Pressure
Ref. 802 140 / Ref. 802 201-B
1
Set Controls Turn On Gas/Air Supply Adjust Pressure
On Unit
Select Desired
Amperage To Be-
gin Cutting
Set To 80 PSI
Requires
90−150 PSI Supply
Setting Gas/Air Pressure
Place Output Control in
Gas/Air Set Position
Power Switch On
Rear of
Unit
2
3