Marantz Mrantz DLP Projector VP-11S2 - Manual (Page 26)

18
ENGLISH
BASIC OPERATIONS
Press the ON button on the remote controller or the / I button on the projector.
The ON indicator lights up.
Switch to the equipment connected to the projector.
Every time the INPUT button of the projector or the INPUT
3 button of the remote controller is pressed,
the input signal rotates in the order of COMPONENT 1 ➔ COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB
➔ HDMI 1 ➔ HDMI 2. When the INPUT 4 button of the remote controller is pressed, the input signal
rotates in the opposite order. An input signal can also be directly selected by pressing one of the COMP.1,
COMP.2, S-VIDEO, VIDEO, RGB, HDMI 1 and HDMI 2 buttons on the remote control.
INPUT
V-MUTE
ENTER
MENU
ASPECT INFO.
C1 C2 S G1
H1 H2 V G2
A1 A2 RGB G3
STD DYN
I
M
A
G4 THTR
COMP.1 COMP.2 S-VIDEO USER
HDMI 1 HDMI 2 VIDEO
AUX 1
BLANKING
AUX 2
IRIS LAMP C.TEMP GAMMA
B1 OFF B3 B2
Selecting the Input Signal Source
C1 C2 S G1
H1 H2 V G2
A1 A2 RGB G3
STD DYN G4 THTR
COMP.1 COMP.2 S-VIDEO USER
HDMI 1 HDMI 2 VIDEO
AUX 1 AUX 2
ON STANDBY
IRIS LAMP C.TEMP GAMMA
Turning on the Power
You can select 5 kinds of ASPECT mode using remote controller.
Pressing the ASPECT button on the remote control rotates the
aspect ratio in the order of FULL
➔ NORMAL ➔ ZOOM ➔ V-
STRETCH ➔ THROUGH, allowing you to select an aspect ratio.
An aspect ratio can also be directly selected by pressing one of
the FULL, NORMAL, ZOOM or THROUGH buttons on the remote
controller. A selection can also be made from the menu. (
☞
P.26)
Selecting the Aspect Mode
INPUT
V-MUTE
ENTER
MENU
ASPECT
FULL
CINEMA VCR MODE BLACK LEVEL PATTERN
BLACK
NOR ZOOM THRU
INFO.
I
M
A
BLANKING
B1 OFF B3 B2