Picture adjust – Marantz Mrantz DLP Projector VP-11S2 User Manual
Page 33
25
ENGLISH
– Gamma setting
To change the type of Gamma curve, set the Picture Mode (
☞
p.24) to User (1 – 9). Select “Gamma”
from the displayed menu followed by the desired gamma curve (A, B, C, D, E, Theater, Standard or
Dynamic).
– Color Temp. (Color Temperature)
1 :
Red comes out strong. Color temperature is about 5250 K.
2 :
Red is mildly strong. Color temperature is about 5800 K.
3 :
Normal. Color temperature is about 6500 K.
4 :
Blue is mildly strong. Color temperature is about 7500 K.
5 :
Blue comes out strong. Color temperature is about 9300 K.
HB : High Bright : Display brightest image.
NOTES:
- To adjust picture quality, set the index to a mode other than the default. See “Picture Mode”.
(
☞
P.24)
- The Gamma cannot be set unless User (1 - 9) is set for the Picture Mode (
☞
P.24).
- Tint cannot be adjusted for RGB input. For details, see “Functions by Signal.” (
☞
P.22-23)
- The settings made in Picture Adjust are saved in the currently selected Picture Mode index.
A
B
C
D
E
Theater
Dynamic
Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be
saved in memory.
User 1
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
HDMI
Gamma
Contrast
Brightness
Color
Tint
0
0
0
3
0
Lamp Mode
Color Temp.
Normal
A
Iris
1
Sharpness
0
Picture Adjust
Adjustments
A, B, C, D, E, Theater,
Standard, Dynamic
-50
Ф
0
Ф
50
(Weak)
(Default)
(Strong)
-50
Ф
0
Ф
50
(Dark)
(Default)
(Bright)
-50
Ф
0
Ф
50
(Light)
(Default)
(Deep)
R10
Ф
0
Ф
G10
(Purple)
(Default)
(Green)
0
50
1
2
3
4
5
HB
(Red)
(Blue)
Normal, Economy
1
2
3
Contrast
(High)
(Low)
Brightness (Low)
(High)
Sets the lens and illumination
aperture.
Item
Gamma
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
(Color Temperature)
Lamp Mode
Iris