Magellan NAV6000 - Manual (Page 23)

Magellan NAV 6000 13
Press
INSERT
. As you begin
moving the cursor, two dashed
lines are displayed showing
how the route is being
changed.
When you are satisfied with the lo-
cation of the cursor, press
ENTER .
If there is an existing waypoint at
that position, it will be used in the
route, if not, the Insert Waypoint
window will be displayed. This
window behaves like the other
MARK CURSOR POSITION
windows presented in this tutorial.
Pressing
DONE
accepts the
new waypoint and the route
now resembles the one at the
right.
Removing a Waypoint. An-
other common editing function
is removing a waypoint from a
route. Move the cursor to the
waypoint to be removed from
the route. (Please note that the
waypoint is not removed from the
receiver’s memory, but only from
this route.) MARK CURSOR POSITION
Name:
Type:
DESCRIPTION:
CURSOR
WPT004
33`01.08 ’ N
117`38.63 ’ W
MAR/17/97 03:39:03 PM
0 F
T
n
m
n
m
°
WPT001
WPT002
WPT003
ENTER to insert Quit to exit
FROM:WPT002 SCALE 90.0
BRG 151 DST 16.1
CURSOR
33 01.08 N 117 38.63 W
n
m
n
m
°
WPT001
WPT002
WPT003
ENTER to append Quit to exit
TO: WPT004 SCALE 90.0
BRG 151 DST 16.1
CURSOR
33
°
01.08 N 117
°
38.63 W
MANUAL MOVE INSERT REMOVE
WPT004
n
m
n
m
°
WPT001
WPT002
WPT003
ENTER to append Quit to exit
TO: CURSOR SCALE 90.0
BRG 212 DST 0.58
CURSOR
33 16.14N 117 44.35 W
MANUAL MOVE INSERT REMOVE
WPT004
° °