Magellan NAV6000 - Manual (Page 60)

Magellan NAV 6000 50
Turning the Beeper On or Off
The beeper can be turned on and off.
Beeper activation is independent of alarm control.
Press the MENU softkey, use the CURSOR KEY
to highlight System Setup and press ENTER.
The SETUP MENU appears. Use the CURSOR
KEY to highlight Beeper, press ENTER.
Use the CURSOR KEY to select On or Off and press EN-
TER.
Press QUIT to exit.
Default setting: On
Activating Alarms
The ALARMS menu allows you to set alarms for arrival ra-
dius, anchor, and cross track error. When the alarm condi-
tion is met, the beeper will sound and if an external alarm is
connected, it will sound also (Beeper activation is indepen-
dent from the alarm).
Press the MENU softkey, use the
CURSOR KEY highlight Alarms and
press ENTER. Use the CURSOR
KEY to highlight the alarm to be acti-
vated and press ENTER.
Default setting: All Off
Setting Arrival Radius
If the alarm is on, it will sound when the boat comes within a
certain distance of the destination waypoint(s) of the route.
The arrival radius can be set between 0.01 and 9.99 distance
units.
From the Alarms menu, use the CURSOR KEY to highlight
Arrival and press ENTER.
Use the CURSOR KEY to highlight On and
press ENTER.
Use the CURSOR KEY to select desired ra-
dius and press ENTER. Press QUIT to exit.
Default setting: Off
Setting Anchor Alarm
While the unit is computing position fixes, the alarm will
sound when the boat has moved more than a certain distance
from the position where the alarm was activated. The anchor
radius can be set between 0.01 and 9.99 distance units.
From the Alarms menu, use the CURSOR
KEY to highlight Anchor and press ENTER.
Use the CURSOR KEY to highlight On and
press ENTER.
ALARMS
Arrival Off
Anchor Off
XTE Off
ANCHOR
Off
On
ARRIVAL
Off
On
BEEPER
Off
On