Magellan NAV6000 - Manual (Page 24)

Magellan NAV 6000 14
Press REMOVE . WPT002 is
removed from the route but is
still displayed on the screen.
The route has been
reconfigured, starting at
WPT001, to WPT004, and
ending at WPT003.
Press
QUIT
to exit edit
mode.
Activating a Route. A route can be activated from the route
list.
From any root screen press the Routes, List softkeys. The
route list appears, containing up to twenty-five routes you
have created. Use the CURSOR KEY to scroll to additional
pages, if any.
Highlight the route you wish to activate and press the
ACTVTE
softkey.
Only one route can be activated at a time. Activat-
ing a route automatically deactivates the previous
active route.
A window appears briefly: “Activate: Route #x is active.” Press
QUIT
twice to exit. The next time you access the Route
List, the letter A appears next to the active route. The display
returns to the route map screen, showing the activated route.
Deactivating a Route. An activated route can be deactivated
from the route list.
From any root screen press the Routes, List softkeys.
The activated route is shown by an A next to the route num-
ber in the list. Use the CURSOR KEY to highlight the route
to be deactivated, and press the DEACTV softkey.
The A next to the route in the list disappears. The selected route
has been deactivated. When you return to the map screen,
the deactivated route is no longer shown.
° n
m
n
m
°
WPT001
WPT002
WPT003
ENTER to append Quit to exit
TO: CURSOR SCALE 90.0
BRG 212 DST 0.58
COG 346 SOG 0.0
33 16.14N 117 44.35 W
MANUAL MOVE INSERT REMOVE
WPT004
° °
°
K
t