R0.82, 01h23m – Magellan NAV6000 User Manual

Page 29

Advertising
background image

Magellan NAV 6000

19

Map Screen

From the SAT STATUS screen, press

NXT PG

to access the

Map Screen. The Map screen can also be accessed by the MAP/
CTR Key from any screen.

When the Map Screen is viewed for the first time after the
unit is turned on, the map always shows the cursor location
before the unit was turned off.

If the receiver is not yet initialized, and a C-card is
not installed, the cursor position defaults to
00

°

00.00 N and 00

°

00.00 W, off the African coast

in the Gulf of Guinea. See Initializing.

On the bottom of the screen, an information window dis-
plays the name of the destination waypoint of the active route
(if any), the bearing and distance from the present position to
the destination waypoint, the cartographic scale, as well as
COG, SOG, XTE and ETE, if you are moving.

Ten seconds after accessing the Map screen, the help bar dis-
appears to show more of the map.

When the cursor is active, the coordinates of the cursor, dis-
played in WGS94 format, will replace the XTE and ETE.

Los Angel

ENTER for ALLINFO

&

BRG/DIS

MENU

ROUTES

HIDE

NXTPG

n

m

n

m

°

n

m

K

t

L
O
W

WPT002

WPT001

TO: WPT023 TRKPLT 240

BRG

134

DST

23.1

COG

137

SOG

16.1

XTE

R0.82

ETE

01h23m

°

Advertising