Marantz ZR6001 - Manual (Page 16)

ENGLISH
13
CONNECTING AN IR EMITTER (OTHER BRAND PRODUCT)
When the ZR6001 and ZC4001 are connected via the PLC, the ZC4001 can control other brand product.
Other brand product is controlled by remote control signals sent from an emitter connected to the IR
EMITTER OUT terminals of the ZR6001 to the IR sensor of the source unit.
To control other brand’s output, an IR code must be set. If the IR code of the source is unknown, the IR
code learning feature must be used.
1. Connect an emitter to an IR EMITTER OUT terminal on the ZR6001.
2. Position the IR output of the emitter near to the IR sensor of the other brand source.
Notes:
• Up to 4 emitters can be connected to the ZR6001.
• To control Marantz products from the ZC4001 over a PLC connection, connect the source as explained in
“CONNECTING TO THE RC-5” on page 17.
SPEAKER SYSTEMS : MINIMUM 6 OHMS SPEAKER SYSTEMS : MINIMUM 6 OHMS FRONT FRONT CENTER CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK M. SPEAKER B M. SPEAKER B
MULTI MULTI
OUT OUT
TV TV DVD DVD
C C
IN IN OUT OUT S-VIDEO S-VIDEO DVD DVD DSS/VCR2 DSS/VCR2
C C
RS-232C RS-232C
RC RC MULTI MULTI
IN IN OUT OUT DSS/VCR2 DSS/VCR2
IN IN OUT OUT OUT OUT VCR1 VCR1
VCR1 VCR1
L L
SBR SBR
SBL SBL
OUT OUT PRE PRE
SL SL L L
SR SR R R
DSS/VCR2 DSS/VCR2 DVD DVD TV TV
R R
IN IN
R R SW SW
RC-5 RC-5 IN IN
SR SR
AUDIO AUDIO
7.1CH 7.1CH
IN IN
OUT OUT IN IN
L L SL SL
SBR SBR
SBL SBL CD CD
IN IN OUT OUT SW SW OUT OUT
CDR/MD CDR/MD TAPE TAPE
OUT OUT IN IN
IN IN OUT OUT VIDEO VIDEO MONITOR MONITOR VCR1 VCR1 TV TV OUT OUT
( (AUX2 AUX2) )
MONITOR MONITOR
DIGITAL IN DIGITAL IN DIGITAL OUT DIGITAL OUT
3 3
1 1 OPT. OPT. 2 2
4 4 COAX. COAX.
R R L L L L R R R R L L
SWITCHED SWITCHED UNSWITCHED UNSWITCHED 1A 120W MAX 1A 120W MAX 1A 120W MAX 1A 120W MAX
FM FM ( (75 75 Ω Ω ) )
ANTENNA ANTENNA
GND GND AM AM
COMPONENT VIDEO COMPONENT VIDEO
C CB B//P PB B C CR R//P PR R C CR R//P PR R C CR R//P PR R C CB B//P PB B C CB B//P PB B INPUT-1 INPUT-1 Y Y Y Y MONITOR OUT MONITOR OUT INPUT-2 INPUT-2 Y Y
OUT OUT
AC OUTLETS AC OUTLETS 120V 60Hz 120V 60Hz
AC IN AC IN
IR EMITTER OUT IR EMITTER OUT
R R
1 1
L L
2 2 3 3 4 4
MULTI FIXED OUT MULTI FIXED OUT
IN IN FLASHER FLASHER
MODEL NO. ZR6001 MODEL NO. ZR6001
OTHER BRAND DVD PLAYER
OTHER BRAND VCR
IR SENSOR
EMITTER
IR OUTPUT
SPEAKER PLACEMENT
The ideal surround speaker system for this unit is
7-speaker systems, using front left and right
speakers, a center speaker, surround left and right
speakers, a surround back left and right speakers,
and a subwoofer.
For best results we recommend that all front
speakers be of the same type, with identical or
similar driver units. This will deliver smooth pans
across the front sound stage as the action moves
from side to side.
Your center channel speaker is very important as
over 80% of the dialog from a typical motion
picture emanates from the center channel.
It should possess similar sonic characteristics to
the main speakers. Surround channel speakers
need not be identical to the front channel
speakers, but they should be of high quality.
The surround center speaker is useful for playback
of Dolby Digital Surround EX or DTS-ES. One of
the benefits of both Dolby Digital and DTS is that
surround channels are discrete full range, while
they were frequency limited in earlier “Pro Logic’
type systems.
Bass effects are an important part of home theater.
For optimal enjoyment a subwoofer should be
u s e d a s i t i s o p t i m i z e d f o r l o w f r e q u e n c y
reproduction. If you have full range front speakers,
however, they may be used in place of a
subwoofer with proper setting of the switches in
the menu system.
Front left and right speakers
We recommend to set the front L and R speakers
with 45-60 degrees from the listening position.
Center speaker
Align the front line of the center speaker with the
front L/R speakers. Or place the center speaker a
little backward from the line.
Surround left and right speakers
When the ZR6001 is used in surround operation,
the preferred location for surround speakers is on
the side walls of the room, at or slightly behind the
listening position.
The center of the speaker should face into the
room.
Surround back left and right speakers
Surround back speakers are required when a full
7.1-channel system is installed.
Speakers should be placed on a rear wall, behind
the listening position.
The center of the speaker should face into the
room.
Subwoofer
We recommend using a sub-woofer to have
maximum bass effect. Sub-woofer bears only low
frequency range so you can place it any where in
the room.
HEIGHT OF THE SPEAKER UNITS
Front left and right speakers, and a center speaker
Align the tweeters and mid-range drivers on the
three front speakers at the same height, as best as
possible.
Surround left and right speakers, and surround
back speaker
Place the surround left, right and surround back
speakers higher than your ears by about 2 Ft. – 3
Ft. (70 cm – 1 m). Also place the speakers at the
same height, as best as possible.
Note:
• Use magnetically-shielded speakers for front left,
right and the center speakers when the speakers
are installed near the TV and the TV is a monitor
type.
90 ° 110 °
22 °
30 °
135 °
150 °
0 °
Front Right
Front Left
Front Center
Surround Left
Subwoofer
Surround Back
Left
Surround Right
Surround Back
Right
70cm
1m 2 Ft. – 3 Ft.
(70 cm – 1 m)
06.3.6, 4:27 PM Page 13