Marantz ZR6001 User Manual

Page 27

Advertising
background image

ENGLISH

24

8 7.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for
7.1-channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.

1.

Select “

7.1CH INPUT

” in the SETUP MAIN

MENU with the or cursor buttons, and
press the

ENTER

button.

2.

To select “

VIDEO IN

”, press or cursor

button.

3.

Using the or cursor buttons, select the
video input source which is emitted from
Monitor out in the 7.1 CH INPUT function.
The input source is switched by pressing the

or cursor buttons as follows;

LAST

TV

DVD

VCR1

DSS

AUX1

V-OFF

LAST

Notes:

• When select LAST, the source is set previous

source before 7.1 CH INPUT function is activated.

• When select V-OFF, no signal is emitted from

monitor out terminal.

4.

To Select desired channel , press the or
cursor buttons.

5.

Using the or cursor buttons, adjust the
volume level of each channel.

6.

After you complete this portion of the set up,
move the cursor to “

MAIN

” with the or

cursor buttons and press the

ENTER

button.

Notes:

• These settings will be memorized to 7.1CH INPUT

source.

• This feature can be directly selected with the

CH.SEL button of the remote controller.

8

7 . 1

CH

I N P U T

L E V E L

V I D EO

I N

:

L A S T

F RON T

L

:

0

d B

C E N T E R

:

0

d B

F RON T

R

:

0

d B

S URR . R

:

0

d B

S URR . B R

:

0

d B

S URR . B

L

:

0

d B

S URR . L

:

0

d B

S UB W

:

0

d B

MA I N

E X I T

LEVEL (VOLUME LEVEL):

Adjust the Multi-speaker output level with or
cursor button.

Note:

• This setting can be changed when the Surr Back is

set “NONE” in 2-1 SPEAKER SIZE menu.
When this setting is unavailable, “

✽✽✽” is

displayed

MAIN ROOM STATUS:

Selected input source in the main room will be
displayed.

Note:

• If “VOLUME” is set to “FIXED”, the multi-room

output level cannot be adjusted from the second
zone.

After you complete this portion of the set up, move
the cursor to “

MAIN

” with or cursor buttons and

press

ENTER

button.

9 MULTI PLC SETUP

This submenu is for setting up the Multi PLC
feature of the ZR6001.

1.

Select “

9. MULTI PLC

” in the SETUP MAIN

MENU with the or cursor buttons and
press the

ENTER

button.

2.

To select desired contents, press or
cursor button.

MULTI PLC SEVER:

Select “ON” or “OFF” with the

/ cursor buttons

to turn the Multi PLC Server feature ON/OFF.

CONNECTION MODE:

Select the Connection Mode of the Multi PLC
feature with the

/ cursor buttons.

The available Connection Modes are:

- AUTO

:Normal mode

Use this mode as standard.

- HIGH AUDIO QUALITY(H-AQ)

:Emphasizes audio quality.

Use this mode to listen to high audio quality.
(However, when multiple ZC4001 units are
connected, audio may be lost or noise may
occur in a ZC4001 that experience poor
reception.)

- HIGH RELIABILITY(H-R)

:Emphasizes reliability.

Use this mode when multiple ZC4001 units are
connected, audio is lost, or noise occurs.

9

MU L T I

P L C

MU L T I
CONN E C T I ON MOD E :

AU T O
H I GH AUD I O QUA L I T Y
H I GH R E L I AB I L I T Y

GP

I D

S E T T I NG : S T AR T

MA I N

E X I T

P L C S E R V E R : ON

GP-ID SETTING

To set a Group ID, connect the AC power cables of
the ZR6001 and ZC4001 to wall power outlets as
close to each other as possible.
Set the Group ID simultaneously for the ZR6001
and ZC4001.

<ZR6001>

U s i n g t h e O S D m e n u s y s t e m , s e t “ G P - I D
SETTING” to “START”.

1.

Select “

9. MULTI PLC

” in the SETUP MAIN

MENU with the or cursor buttons, and
press the

ENTER

button.

2.

Select “GP-ID SETTING” with the or
cursor buttons.

<ZC4001>

1.

Press and hold the

ENTER

button for 5 sec or

more.

9

MU L T I

P L C

MU L T I
CONN E C T I ON MOD E :

AU T O
H I GH AUD I O QUA L I T Y
H I GH R E L I AB I L I T Y

GP

I D

S E T T I NG : S T AR T

MA I N

E X I T

P L C S E R V E R : ON

1. 3. 2.

06.3.6, 4:28 PM

Page 24

Advertising
This manual is related to the following products: