Maytag HRX40DERS - Manual (Page 7)

7
EXPANSION TANKS FOR THERMAL EXPANSION
CONDITIONS AVAILABLE IN 2 GALLON (PART
NUMBER ETC2X) AND 5 GALLON (PART NUM-
BER ETC5X) CAPACITY
Accessories and Tools Needed
Accessories
To simplify the installation Maytag has available the installa-
tion parts shown below. You may or may not need all of these
accessories depending on your type of installation. Call a
Maytag Service Specialist at 1-800-365-0024 for an autho-
rized installer.
Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local
Maytag store.
ROLL OF TEFLON TAPE
(Use only on water connec-
tions)
GARDEN HOSE
6 FOOT TAPE
PIPE DOPE
(SQUEEZE TUBE)
DRILL
PIPE
WRENCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY
CLOTH
SOLDER FLUX TUBING CUTTER
PROPANE TORCH
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
• Pipe Wrenches (2) 14 ″
• Screwdriver
• 6 Foot Tape or Folding Rule
• Garden Hose
• Drill
• Pipe dope or Teflon Tape
SLOT-HEAD SCREW DRIVER
PHILLIPS SCREWDRIVER
3/4 ″ WIRE BRUSH
1/2 ″ WIRE BRUSH
HACKSAW
DRAIN PANS AVAILABLE IN 22 ″ DIAMETER (PART
NUMBER 9001609) FOR WATER HEATERS HAVING
A DIAMETER 20
″ OR LESS, 24″″ DIAMETER (PART
NUMBER 9002769) FOR WATER HEATERS HAVING
A DIAMETER 22
″″ OR LESS AND AVAILABLE IN 28″
DIAMETER (PART NUMBER 9001608) FOR WATER
HEATERS HAVING A DIAMETER 26.25
″ OR LESS