MITSUBISHI ELECTRIC TG-2000A User Manual
MITSUBISHI ELECTRIC Software
Advertising
Table of contents
Document Outline
- Title
- Contents
- 1. Safety Precautions
- 2. System Requirements
- 3. System Configuration
- 4. Flow of Site Adjustment
- 5. Installation
- 6. Part Names and Functions
- 7. Initial Startup and Shutdown
- 8. System Setting Procedure
- 8.1 System Setting Screen
- 8.2 System Setting Procedure
- 8.3 User Set-up
- 8.4 Site Name Set-up
- 8.5 G-50 Connection Set-up
- 8.6 System Configuration Set-up
- 8.7 Monitoring Screen Set-up
- 8.7.1 Configuration Procedure and Restrictions
- 8.7.2 Set-up of model name (Step 1)
- 8.7.3 Set-up of the number of floors, and floor name (Step 2)
- 8.7.4 Creation of a plane view (Step 3)
- 8.7.5 Set-up of floor name and G-50 (Step 4)
- 8.7.6 Set-up of icon arrange and name (Step 5)
- 8.7.7 Set-up of block (Step 6)
- 8.8 Watt Hour Meter Set-Up
- 8.9 Energy Monitoring Set-up
- 8.9.1 Setting Procedures and Restrictions
- 8.9.2 Division mode (Step 1)
- 8.9.3 Relation between outdoor units and watt hour meters (Step 2)
- 8.9.4 Electrical specification of outdoor units (Step 3)
- 8.9.5 Relation between indoor units and watt hour meters (Step 4)
- 8.9.6 Electrical specification of indoor units (Step 5)
- 8.9.7 Charge Blocks (Step 6)
- 8.9.8 Currency unit set (Step 7)
- 8.9.9 Charge set (Step 8)
- 8.9.10Standard charge set (Step 9)
- 8.10 Time Set-up
- 8.11 Password Set-up
- 9. Charge Data Correction and Remedy
- 9.1 Result of Air-conditioning Charge Calculation
- 9.2 Maintenance of Charge Data
- 9.2.1 Preparing for Charging Data Maintenance
- 9.3 Operation Amount Data Monitoring
- 9.4 Charge Parameter Output
- 9.5 Charging Remedy
- 9.5.1Preparing to perform remedy
- 9.5.2Remedial apportioning setting screen
- 9.5.3Remedy when personal computer HDD fails (no backup)
- 9.5.4 Remedy when personal computer HDD fails (backup)
- 9.5.5 Apportioning method when computer crashes
- 9.5.6 Remedy when watt hour meter fails (monitoring impossible)
- 9.5.7 Remedy for system information setting error
- 10. Error Code List
- 11.Setting Check List
- Appendix 1: Installing Windows XP Professional
- Appendix 2: Auto Log-in Confirmation Method
- Appendix 3: Correction to Charge Calculation in the Event of G-50A Replacement due to Fault