Metrologic Instruments StratosS MS2220 - Manual (Page 19)

13
I NSTALLATION
U NPACKING THE U NIT
1. Make sure the shipping box is top-side up before opening.
2. Remove the accessories box and check the box’s content
for the following items.
• Product Manuals
• Power
Supply
• Communication Cables
• Remote Scale Display (Optional)
3. Carefully remove the platter and store it in a safe location
until the unit is properly installed into the checkout counter.
4. Remove both cardboard inserts from the box.
5. Lift the MS2220 scanner out of the box by carefully
grasping both sides near the center of the unit and lifting
directly up. Refer to Figure 13 for hand placement.
Important! Do not remove the MS2220 scanner from the
box by grabbing the shipping foam. This can
result in the unit falling!
6. Carefully remove the shipping foam from around
the MS2220 scanner.
Figure 11
Figure 12
Figure 13
Figure 14