Mercury INSTALLATION MANUAL D7.3L D-TRONIC - Manual (Page 74)

D7.3L D-TRONIC DIESEL ENGINES - BRAVO MODELS
Page 74 of 90
2. Install propeller with attaching hardware as shown. Tighten nut a minimum of 55 lb-ft (75
Nm), then continue to tighten until 3 tabs on the tab washer align with grooves on spline
washer. Bend the 3 tabs down into grooves.
75492
a
b
c
f h
e
g d
Bravo One
a -
Forward Thrust Hub
b -
Flo-Torque Drive Hub
c -
Propeller
d -
Continuity Washer
e -
Drive Sleeve Adapter
f -
Tab Washer
g -
Locknut
70561
a
b
c d e
f
Bravo Two
a -
Apply Lubricant on Splines of Propeller Shaft
b -
Forward Thrust Hub
c -
Propeller
d -
Continuity/Spline Washer
e -
Tab Washer
f -
Locknut