Multi-Tech Systems RouteFinder RF550VPN - Manual (Page 14)

Multi-Tech Systems, Inc. RF550VPN Quick Start Guide
10
7. Next, select the Protocol tab to set your workstation’s IP Address.
8. Click the Properties button and choose one of the following:
·
To set a Dynamic IP Address, check Obtain an IP Address Automatically.
Dynamic Addresses are used in Examples Reference Guide in Example 2 –
Site B and Example 3 – Site B.
·
To set a Fixed IP Address, check Specify an IP address. Fixed Addresses are
used in all the examples, except the two mentioned above. For our example,
set the address to 192.168.2.x.
Click OK.
9. Close out of the Control Panel.
10. Repeat these steps for each PC on your network.