Multi-Tech Systems RouteFinder RF550VPN - Manual (Page 28)

Multi-Tech Systems, Inc. RF550VPN Quick Start Guide
24
Remote IPSec Identifier).
Enable Keep Alive When enabled, will automatically renegotiate VPN if a
tunnel is temporarily interrupted. Enabled
Remote Site Choose whether the remote site will be used by a
single user or a LAN.
Enable NetBIOS
Broadcast
When enabled, will allow Microsoft File and Printer
sharing to communicate information about computers
on the network. Enabled
Remote IP Network Enter Remote IP Network address (LAN) for Site B. 192.168.10.0
Remote IP Netmask Enter Remote IP Netmask address for Site B. 255.255.255.0
Remote Gateway
IP/FQDN
Enter Remote Gateway IP address (WAN) for Site B. 204.26.122.3
Network Interface Select the Network Interface from the drop-down list
box. WAN
ETHERNET
If You Select IKE for the Secure Association, the Following Fields Display
Secure Association Select IKE (the default) to set how inbound packets will be
filtered. IKE primarily encompasses router key exchange and
the negotiation of security policy. Selecting IKE activates the
remaining input settings on this screen.
Perfect Forward Secure Check the Enabled button.
Encryption Protocol Select 3DES.
PreShared Key Enter the PreShared Key name. You
can enter an alphanumeric name, but it
must match the security code for the
RouteFinder at site B. 1234
Key Life Enter the amount of time that tells the
router to renegotiate the Key 3600 seconds
is 60 minutes
IKE Life Time Enter the amount of time that tells the
router to renegotiate the IKE security
association. 28800 seconds
is 8 hours
Click the Save button. Your defined connections are displayed at the bottom of this screen
where you can edit or delete them.
This concludes the basic configuration of your SOHO RouteFinder.
It is a good idea to save the settings at this time by clicking the Save and Restart
button.
Chapter 6 in the User Guide provides the directions for using the RouteFinder’s
Advanced Settings.