Multi-Tech Systems RouteFinder RF550VPN - Manual (Page 8)

Multi-Tech Systems, Inc. RF550VPN Quick Start Guide
4
2 – Installation
Safety Warnings
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in a wet location unless the jack is specifically
designed for wet locations.
3. This product is to be used with UL and cUL listed computers.
4. Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
5. Avoid using a telephone during an electrical storm. There may be a remote risk of
electrical shock from lightening.
7. Do not use the telephone to report a gas leak in the vicinity of the leak.
8. To reduce the risk of fire, use only No. 26 AWG or larger Telecommunications line
cord.
System Requirements
·
Microsoft Internet Explorer 4.0+ or Netscape Navigator 4.0+
·
One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet card
·
One Modem or ISDN TA (if a dialup backup connection is needed)
·
One RJ-45 xDSL/Cable Internet connection
·
TCP/IP protocol installed
·
UTP network Cable with a RJ-45 connection
Unpacking Your RouteFinder
·
The RF550VPN shipping box contains the following items:
·
The RouteFinder RF550VPN
·
System CD
·
Power Supply
·
This Quick Start Guide
If any of the items is missing or damaged, please contact Multi-Tech Systems, Inc.