Multi-Tech Systems RouteFinder RF550VPN - Manual (Page 7)

Chapter 1 – Introduction and Description
3
RF550VPN Back Panel
1 2 3 4 Serial
Reset
WAN
5VDC
Power 5VDC The power port connects the AC power adapter.
10 BT WAN
(10Base-T)
The WAN port connects the xDSL modem or cable modem.
Serial The Serial port connects a standard modem (optional).
Reset
The Reset button resets the router to factory defaults. Press and
hold button until the serial LEDs blink. Then release the reset
button. Do not press it again - you will clear the current data.
Ports 1 - 4
There are 4 LAN ports. You can connect to PCs, FTP servers,
printers, or other devices you want to put on your network.