Marantz PMD670 - Manual (Page 19)

16, 17, 18. MARK/
EDIT buttons
This button group
MARK
EDIT
controls EDL Marks and Editing functions.
EDL Marks
Mark functions: manually adding Marks, and
locating Marks.
Adding EDL Marks
Press and release the MARK/ EDIT button to
manually add an EDL Mark during recording.
Press the MARK/ EDIT button during pause,
recording, or playback to add an EDL Mark.
During recording adding an EDL Mark introduces
an audible click in the recording when using the
internal microphone.
Locating EDL Marks
From Stop press and release the Mark forward
button (18) or Mark reverse button (16) to tab
through the EDL marks on the CF card.
L
R
-dB over 0 2 6 12 20 40 00
-dB
TRACKTIME
MARK
Example display.
EDL Mark location as recording time
from the beginning of the track.
EDL Mark
number
EDL Mark type
To start playback from the displayed EDL Mark
press and release the PLAY/PAUSE button.
MARK dis-
played (instead
of TRACK)
MIC ATTEN
0dB -20dB
FLAT
ANC
LEVEL CONT.
LIMITER
ALC MANUAL OFF ON
EDL PLAY
STEREO
L
ANALOG OUT
R OFF ON
AUTO MARK
OFF ON
PRE REC
MARK A-B REPEAT INPUT
EDIT
SINGLE
OFF ALL
OFF ON
INPUT LOCK
16 17 18
L
R
-dB over 0 2 6 12 20 40 00
-dB
TRACKTIME
MARK
- 19 -
Edit functions: editing EDL Marks to create
custom playback sequences, erasing and renum-
bering Tracks, and formatting the CF card.
Custom playback sequences
EDL Marks are numbered consecutively from 001
and automatically renumbered when an EDL
Mark is added or erased. Playback is also con-
secutive from the point that playback begins.
EDL Mark custom playback can:
Skip playback from the beginning of a 'Skip' EDL
Mark to the beginning of the next EDL Mark.
A-B loop from a 'Loop_A' EDL Mark to a 'Loop_B'
EDL Mark.
Note: EDL Marks are not automatically placed at
the beginning of tracks. If you want your custom
playback sequence to include track beginning
points add EDL Marks to coincide with track
beginning points by:
a. Start playback by pressing and releasing
PLAY/Pause and then pause playback by
pressing and releasing PLAY/Pause
again.
b. Press and release TRACK JUMP forward
or TRACK JUMP reverse until the desired
track number is displayed.
c. Press and release the MARK/ EDIT button.
Editing EDL Marks:
All EDL Marks are initially entered as 'Point'
marks.
From Stop display the EDL Mark by pressing and
releasing the Mark forward button (18) or Mark
reverse button (16) to tab through the EDL marks
on the CF card.
When the EDL mark to be edited is displayed
press and release the MARK/ EDIT button. The
current EDL Mark type will be flashing.
Example
display.
19 -
19 -
19 -
19 -
19