Marantz PMD670 - Manual (Page 44)

3 COLD 2 HOT
2
3 1 2
3 1
1 GND
L R MIC
L
R
LINE
IN
REMOTE
LINE
OUT PHANTOM
+48V
ON
OFF
16. Remote jack
Plug a wired remote (not
supplied) in here.
REMOTE
Right side
- 44 -
L
R
LINE
IN
LINE
OUT
LINE OUT jacks
Plug Left and Right RCA audio cables in here to
connect to the input of an amplifier or other
external unit.
During playback what is output on the L or R
channel depends on the recording and for a
Stereo or Dual Mono recording, the setting of the
ANALOG OUT switch.
LINE IN jacks
Plug Left and Right RCA audio cables in here to
connect to the output of an external unit.
17. LINE OUT/IN
jacks
Plug external line
level audio devices
in here.
18. MIC IN jacks
Plug external micro-
phones in here.
For mono recording
use the Left jack.
3 COLD 2 HOT
2
3
1 2
3
1
1 GND
L R MIC
To record, stereo with MIC input, DLmono with
MIC input, mono with MIC input, or LRmono with
MIC input must be selected in the input select
menu. See INPUT button.
Notes:
XLR pinout is 1 ground, 2 hot and 3 cold.
Microphones with a PHONE jack can be used
with an adapter (not supplied) from PHONE to
XLR.
To record, mono, stereo, or LR mono LINE input
must be selected in the input select menu. See
INPUT button.
16 17 18
Wiring
diagram
2.5 mm jack
A switch connected to the 2.5mm mini jack off
(open) and on (closed) does the following de-
pending on the RemoteMode setting:
RemoteMode:
Start Stop
During record or playback switch remote off to
pause, on to resume.
EDL Mark
During record or playback switch remote to on
to add an EDL mark.
PWR REC
During POWER off, switch remote to on to
turn power on and begin recording.
During recording, switch remote to off to stop
recording and power off.
M.Track
During recording, switch remote to on to
increment the track. A new track is created at
that point. There is no break in recording.
See Remote Mode on page 36 to set or change
the Remote Mode.