Marantz PMD670 User Manual

Page 48

Advertising
background image

- 48 -

Mark number, number of EDL Marks on CF card

etc. Associated labels are display items 15
and 16.

18. MIC/INT MIC label

The MIC label appears when external micro-
phones are selected.
The INT MIC label appears when input se-
lected for recording is the internal micro-
phone.

19. LINE label

The LINE label appears when input(s) se-
lected for recording is (are) the LINE IN jacks.

20. Record

The Record symbol appears when the
PMD670 is in record mode. Appears with the
Play symbol when recording. Appears flashing
when in record pause.

21. Play

The Play symbol appears when the PMD670
is in playback, playback pause, recording,
record pause.

22. Pause

The Pause symbol appears when the
PMD670 is in playback pause, or record
pause.

23. Battery

The Battery symbol appears in most displays
to indicate battery charge.

indicates that battery charge is okay.

indicates that battery charge is getting low

and there is approximately 5 to 10 minutes of
record or playback time available.

MARK

TRACK

TOTAL TRACKTIME

REC REMAIN kbps

A-B

L

R

-dB

PM

kHz
AM

INT

MIC

LINE

S.SKIP

-dB

over

0

2

6

12

20

40

00

18 19 20 21 22 23 24 25 26

flashing indicates that battery has ap-

proximately 1 to 3 minutes of record or
playback time remaining.

The REC indicator light will flash. If BEEP is
set to On the PMD670 will also beep.

If the PMD670 continues to operate it will
automatically shut down. If recording it will
write track information, stop recording and
power off. If in playback it will stop playback
and power off.

indicates that battery charge is depleted or

no battery is installed.

24. S.SKIP label

The Silent Skip label appears when Silent
Skip is enabled.

25. Margin level

The Margin level is displayed. The PMD670
holds this display at the highest level
achieved during the current recording. If
more than 0 dB, OV is displayed. To reset
the Margin level press and release the
MARGIN RESET button.

26. -dB label

The -dB label applies to the Peak level
display.

Care and Maintenance

Use a soft cloth slightly moistened with mild
detergent solution.

Advertising