Marantz PMD670 User Manual

Page 34

Advertising

- 34 -

Single Play
During playback, when Single Play and Auto Cue
are Off, and the end of a track is reached the
next track automatically starts playing.

During playback, when Single Play is On, and
the end of a track is reached the PMD670 auto-
matically pauses. This differs from Auto Cue in
that Single Play does not cue to start of audio.

Default is S.Play Off.

1. Select the S.Play menu choice:

a. From stop, press and hold the

button for about 2 seconds. MENU will
appear (flashing) in the display.

b. While MENU is flashing (for about 3 sec-

onds) press and release the ENTER button

. The last Menu choice selected will

appear.
(If the flashing MENU times out start over at
a.)

2. Press and release the FWD/+ button

repeatedly until S.Play is displayed and
flashing.

3. Press and release the ENTER button

accept the S.Play choice and switch to On or
Off.

4. Press and release the FWD/+ button

the -/REW button

to toggle between ON

and OFF.

5. When correct Press and release the ENTER

button

to switch to S.Play flashing.

6. Press and release the FWD/+ button

switch to another menu choice, or press and
release the

MENU/STORE button to write

the menu change(s) and return to stop mode.

Beep
When battery charge can provide no more than
1-3 minutes of recording or playback and Beep is
set to On, the battery indicator will flash, the REC
indicator will flash and the PMD670 will beep.

If the PMD670 is not operated for 30 minutes
during stop or play pause, power can be auto-
matically shut off to conserve battery life. (See
A.PowOFF next page.) If A.PowOFF is set to Y,
and Beep is set to ON, the PMD670 will beep to
alert you that the power is shutting off.

Default is Beep On.

1. Select the Beep menu choice:

a. From stop, press and hold the

button for about 2 seconds. MENU will
appear (flashing) in the display.

b. While MENU is flashing (for about 3 seconds)

press and release the ENTER button

The last Menu choice selected will appear.
(If the flashing MENU times out start over at
a.)

2. Press and release the FWD/+ button

repeatedly until Beep is displayed and flash-
ing.

3. Press and release the ENTER button

accept the Beep choice and switch to On or
Off.