6dvd setup menu – Marantz Dv4003 User Manual

Page 41

Advertising
background image

6

DVD Setup Menu

41

Befor

e Y

ou St

ar

t

Co

nnec

ting Up

C

ontr

ol & Displa

ys

Ge

tting St

ar

te

d

Pla

ying Discs

D

VD Se

tup Menu

A

dditional

Informa

tion

ENGLISH

CANCEL

OK

CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.

3) Press

2 to highlight OK in the menu and press

ENTER to confi rm.

The set-up is complete now and you can start to

enjoy the high quality picture.

OFF – Disables the progressive scan

mode.

To deactivate Progressive manually:

1) Press OPEN CLOSE

0 to open the disc tray.

2) Press

2 (LEFT) on the remote control. Press

AUDIO on the remote control.

The DVD background screen appears on the TV.

Tip

• There are some progressive scan TVs and high-

defi nition TVs that are not fully compatible with
this unit, resulting in an unnatural picture when
playing back a DVD Video disc in the progressive
scan mode. In this case, turn off the progressive
scan feature on both the DVD system and your TV.

PICTURE SETTING

• Default setting: STANDARD

This DVD system provides three predefi ned
sets of picture colour settings and one
personal setting which you can defi ne
yourself.

STANDARD – Original colour setting.

BRIGHT – Vibrant colour setting.

SOFT – Warm colour setting.

PERSONAL – Selects this to personalise

the picture colour setting. Use the

2/3

keys to select to the setting that best
suits your personal preference and press
ENTER to confi rm. For an average setting,
select 0.

BRIGHTNESS – Increase the value to

brighten the picture or vice versa.

CONTRAST – Increase the value to

sharpen the picture or vice versa.

TINT – Increase the value to darken

the picture or vice versa.

COLOR – Increase the value to

enhance the color in your picture or
vice versa.

BLACK LEVEL

• Default setting: 7.5 IRE (USA model)

0 IRE (European model)

If you set the TV type to NTSC, set the Black
level shift to 7.5 IRE. This will improve the
color contrast during playback. The black
level setting has no effect if the TV type is
set to PAL.

7.5 IRE – Select this to enhance the black

level.

0 IRE – Select this for the standard black

level setting.

CLOSED CAPTION (USA Model only)

• Default setting: OFF

Closed captions are data hidden in the video
signals of specifi c discs, and are invisible
without the use of a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. Subtitles rarely show all of
the audio. For example, captions show
sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles do not. Before
you select this function, please ensure that
the disc contains closed caption information
and your TV set also supports this function.

ON – Select this to enable the closed

caption function.

OFF – Select this to disable the closed

caption function.

COMPONENT
(Euro model only)

• Default setting: RGB

This setting allows you to toggle the output
of the video signal between RGB (on the A/V
EURO CONNECTOR) and YCbCr (on the
component).

YCbCr – Select this for YCbCr Pr

connection on component Video out.

RGB – Select this for the A/V EURO

CONNECTOR.

To change the COMPONENT out manually:

1) Press OPEN CLOSE

0 to open the disc tray.

2) Press

3 (RIGHT) on the remote control.

3) Press ANGLE on the remote control to change

the COMPONENT out.

Advertising
This manual is related to the following products: