Marantz Dv4003 - Manual (Page 42)

DVD Setup Menu 6
42
Befor
e Y
ou St
ar
t
C
onnec
ting Up
Co
ntr
ol & Displa
ys
Ge
tting St
ar
te
d
Pla
ying Discs
D
VD Se
tup Menu
A
dditional
Informa
tion
ENGLISH
•
HDMI VIDEO
• Default setting: AUTO
Selects a suitable video resolution depending
on the capability of the connected TV/device
to enhance the HDMI video output.
• 480P/525P – Progressive output in 480
lines for NTSC TV
• 576P/625P – Progressive output in 576
lines for PAL TV
• 720P – (if a HDMI TV is connected)
Progressive output upscaled to 720 lines
• 1080i – (if a HDMI TV is connected)
Interlaced output upscaled to 1080 lines
• 1080P – (if a HDMI TV is connected)
Progressive output upscaled to 1080 line
• AUTO – The video output will
automatically follow the display’s
supported resolution
Note
• If no display appears on the TV due to an
unsupported resolution, use the composite video
cable to connect the DVD system and your TV. Turn
on your TV to the correct input channel for the
composite video and adjust the resolution setting
to 480P/576P.
• The resolution can also be set with the HDMI
button on the remote control.
• In general, the larger the number, the higher the
resolution.
• When the resolution is changed, the image may
be corrupted or the output may take longer than
normal.
• Pressing the HDMI button for three seconds or
more toggle the HDMI on/off state.
Note
• When the player is set to YCbCr, some TV may not
properly synchronise with the player on the A/V
EURO connector.
HDMI SETUP
This feature is only applicable if you have
connected this DVD system to a HDMI-
compatible TV/device.
This setting can be toggled on and off by
pressing the HDMI button for three seconds
or more. HDMI is on when the unit is shipped
from the factory.
Note
• This unit supports HDMI Ver. 1.0.
• This unit does not support HDMI control functions
(CEC).
WIDE SCREEN FORMAT
• Default setting: OFF
Selects a suitable screen display. This feature
is only available if you have selected TV
ASPECT – 16:9 WIDE.
• SUPER WIDE – Selects this to display a
4:3 picture disc on a wide-screen TV with
non-linear stretching (the centre position
of the screen is stretched less than the
side).
• 16:9 SQUEEZE – Selects this to display
a 4:3 picture disc on a widescreen TV
without stretching. Black bars will be
shown on the both sides of the TV screen.
• OFF – No aspect ratio adjustment is
made when this option is selected.
Note
• The WIDE SCREEN FORMAT feature will be
disabled if your HDMI TV has been preset to the
480P or 576P settings.