Motorola MotoWI4 PTP 600 Series - Manual (Page 147)

145
Clicking on the warning page image will take the user on to the Recovery Option Page
(Figure 81).
Figure 81 - Recovery Options Page
The recovery options available are:
Upgrade Software Image: This allows the user to reload a software image. This may be the
original image if software corruption is suspected or a step back to an old image if an
incorrect image has just been loaded.
Reset IP & Ethernet Configuration back to factory defaults: This allows the user to reset
the unit back to the factory defaults:
• IP
Address 169.254.1.1
• Netmask 255.255.0.0
• Gateway 169.254.1.0
• Ethernet Interface Auto-negotiate, Auto-MDI/MDIX