Figure 38 – ptp 600 example configuration file – Motorola MotoWI4 PTP 600 Series User Manual

Page 91

Advertising
background image

89

The configuration file is encoded using an ASCII encoding scheme. An example is show in

Figure 38.

Figure 38 – PTP 600 Example Configuration File

WARNING: The configuration file is currently restricted to a single software version and can

only be restored into a wireless unit operating the software version indicated in the

configuration file header.

The configuration file can also be used when swapping out a faulty wireless unit. If one of the

wireless units is replaced on a wireless link a configuration file captured from the faulty unit

can be replaced into the new unit to speed up replacement. It should be noted that when

placing a configuration file into a wireless unit with a different MAC Address the license key

will not be restored and may need to be entered. This can be obtained either from the Quick

Install guide supplied with replacement wireless unit or directly from Motorola. Note that the

target MAC address at the other hand needs to change.

Advertising