Maytag MDE 9901 User Manual

Page 28

Advertising
background image

28

Start Stop

buttons.

RESET PROGRAMME

If you wish to revert to the settings which a pre-
set programme had at the time when the dryer
was supplied, you can reset the programme.
Proceed as follows:
1. Hold down the programme button for the
programme that you wish to reset.
2. Press the

Enter

button once.

3. Release the programme button.

The programme for the button is now reset

to its settings when the dryer was supplied.

STOP FLASHES IN THE DISPLAY

The programme has stopped temporarily be-
cause the door has been opened, the main po-
wer switch has been turned off or the power
supply has been interrupted.

To restart: Press the

button.

To interrupt the programme completely:

Press the

button for three seconds.

Advertising