Miele DA 229-2 - Manual (Page 23)

a
2 protective shields
prevent scratches to the chimney dur-
ing installation.
b
2 hose clips for securing the
ducting.
c
1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d
1 non-return flap
e
Upper retaining plate B secures
the chimney extension.
f
Middle retaining plate C for addi-
tional stability of the chimney.
g
Lower retaining plate A secures
the canopy and the motor assembly.
6 screws 5 x 60 mm
10 large headed screws 5 x 40 mm
(S8 wall anchors included in the pack-
aging are not for use in USA/CDN.)
2 M 6 locking nuts for securing the
motor assembly.
4 screws 3.9 x 7.5 mm for securing the
chimney and the chimney extension.
CAUTION:
During the installation process,
please be careful of sharp edges
that can cause harm.
Installation accessories
23