Attaching the chimney 35, Attaching the chimney, Installation – Miele DA 229-2 User Manual
Page 35
Advertising
Attaching the chimney
^ Remove the protective foil from the
chimney.
^ Pull the chimney apart slightly and
slide it over the chimney extension.
Do this carefully to prevent scratch-
ing the two pieces.
^ Slide the chimney down about
3
/
4
"
(2 cm) into the canopy.
^ Align and adjust the chimney.
^ Remove the protective shields.
^ Secure the chimney to retaning plate
A on both sides with two 3.9 x 7.5
mm screws.
^ Remove the protective foil from the
canopy.
If the chimney is not tall enough an
optional chimney extension can be
ordered. See "Appliance dimen-
sions".
^ Before using the appliance remove
the grease filter and remove the pro-
tective foil from the filter frame. Re-
turn the filter.
Installation
35
Advertising