Miele DA 229-2 - Manual (Page 34)

Attaching the chimney
extension
The use of a chimney extension, allows
the hood to be installed at various dis-
tances from the ceiling.
^ Remove the protective foil from the
chimney extension.
^ Bend the top hanging tabs 45° in-
wards. This will make installing the
chimney extension easier. Be careful
of sharp edges.
^ Pull the chimney extension slightly
outwards and snap over the upper
retaining plate B.
^ Secure the chimney extension to the
upper retaining plate with two
3.9 x 7.5 mm screws.
^ Fold the protective shield at the top.
^ Remove the adhesive backing from
the shield.
^ Stick the shield to the chimney exten-
sion so that it is smooth and flush
with the bottom.
Installation
34