Mustang Survival MD0450 - Manual (Page 18)

6) Check that the new inflator body indicator is green. Insert the new
inflator body with CO
2
cylinder pointing upward inside the Inflatable
PFD (Fig. 17). Let the sealing ring rest on the adapter around the four
lugs.
Green Indicator Caution:
Do not turn
the center
shaft
FIGURE 17
7) Now check the new manual/automatic cap as follows (Fig. 18):
1. Is the single point status indicator showing green?
2. Is the expiry day OK?
If YES is the answer to both questions, then proceed as follows. If the
answer is NO to either question, get a new cap.
Single
Point
Indicator
Water
Inlet
Valve
Expiry
FIGURE 18
8) Hold the CO
2
cylinder through the fabric of the Inflatable Vest with
LIFT TM (Fig. 19). Position the replacement cap with the water inlet
valve pointing to the right and press firmly onto the inflator body
15 MUSTANG SURVIVAL