Mustang Survival MD0450 - Manual (Page 30)

ADJUSTING THE MA1900 SAILING HARNESS
Use this section if you are using a MA1900 Sailing Harness with the
Inflatable Vest with LIFT
TM (Model MD0450 only).
Put the harness on and adjust the harness to a tight personal fit when
the harness rings are tethered. Adjust by pulling (to tighten) or letting
out (to loosen) the free end of left-side body strap in relation to the strap
adjuster (Fig. 40). To test fit, pull the harness rings together. Re-adjust as
required.
WARNING: The harness must be adjusted to fit prior to inflation.
Once the Inflatable Vest with LIFT
TM is inflated, the harness may
no longer be adjusted.
Repack the PFD in accordance with the Repacking instructions (p. 17).
FIGURE 40
IS YOUR PFD IN GOOD AND SERVICEABLE CONDITION?
Check your PFD between outings to be sure that it is properly armed,
as shown by green single point indicator; that it is free of rips, tears or
holes; that all seams are securely sewn; and that the fabric, straps and
hardware are still strong. Inspect the inflatable portion of the PFD in
accordance with the CARE AND MAINTENANCE INSTRUCTIONS (p. 28).
27 MUSTANG SURVIVAL