How do you test your pfd using the oral inflator – Mustang Survival MD0450 User Manual

Page 35

Advertising
background image

Inflatable Vest with LIFT

TM

Owner’s Manual

32

2) Put on the Inflatable Vest with LIFT

TM

.

3) Actuate the inflation system by jerking firmly downward on the

pull-tab. The Inflatable Vest with LIFT

TM

should fully inflate within 5

seconds.

4) Get into shallow water, just deep enough that you can stand with

your head above the surface.

5) See if the Inflatable Vest with LIFT

TM

will float you on your back or

just slightly back of vertical. In a relaxed floating position, verify
that your mouth is well above the water’s surface. Note the effect of
where you hold your legs and how you float.

6) Get out of the water and remove the Inflatable Vest with LIFT

TM

.

Completely deflate the Inflatable Vest with LIFT

TM

using the oral

inflator (see Deflation p. 11).

7) Let the Inflatable Vest with LIFT

TM

dry thoroughly. Re-arm (p. 13) and

Repack the PFD (p. 17).

HOW DO YOU TEST YOUR PFD USING THE ORAL
INFLATOR?

This test is not mandatory, however may be conducted using the
following procedure.

WARNING: Use only a previously fired hydrostatic inflator to
perform this test . DO NOT test with a fully armed hydrostatic
inflator as double inflation may occur, possibly resulting in cell
damage.

1) No spare parts or re-arming kits are needed to test your Inflatable

PFD.

2) Put on the Inflatable Vest with LIFT

TM

.

3) Get into shallow water, just deep enough that you can stand with

your head above the surface.

4) If you are a weak swimmer or non-swimmer, inflate the Inflatable

Advertising