Maytag 110 - Manual (Page 32)

32
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
21 To Remove Oven Inner Back
Open the oven door. For the LH oven unscrew the 2
thermostat phial fi xing screws. Remove the fi xings that
secure the inner back to the oven rear. Lift the removable
panel away. Re-assemble in reverse order. Ensure that
the retaining fi xings are fully tightened.
22 To Replace an Oven Fan
Disconnect the appliance from the electricity supply. Pull
the unit forward to access the cover boxes at the rear
of the appliance. Remove the fi xings that secure the
cover and lift it clear. Remove the fan wiring, noting the
connection positions. Remove the inner back as detailed
in Section 22. Hold the fan blades and undo the centre
nut (LH thread), brass washers, fan blade and circlip.
Undo the fi xings that retain the fan and remove it from the
cavity rear. Fit the replacement and re-assemble parts in
reverse order. Check that the oven operates satisfactorily.
23 To Remove an Oven fan Element
Disconnect the appliance from the electricity supply. Pull
the unit forward to access the cover boxes at the rear of
the appliance. Remove the fi xings that secure the cover
and lift it clear. Undo the terminal connections noting
their positions. Remove the inner back as detailed in
Section 22. Remove the fi xings that secure the element
within the oven and lift the element away carefully. Fit the
replacement element and re-assemble parts in reverse
order. Check that the oven operates correctly.
24 To Remove the LH Oven Bottom and Top
Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at the
rear of the unit. Remove the fi xings that secure the cover
and lift it clear.
Undo the terminal connections, noting their positions.
Remove the element fi xings and withdraw element.
Replace the element and re-assemble parts in reverse
order.
Top Element
Open the LH oven door and undo the fi xings that secure
the heat shield. Remove the top element bracket fi xings
and withdraw element. Replace the element and re-
assemble parts in reverse order. Check that the oven
operates satisfactorily.