Maytag 110 - Manual (Page 34)

34
Technical Data
This cooker is category II
2H3+
It is supplied set for group H natural gas. A conversion kit from NG to LP gas is packed with
the cooker.
INSTALLER: Please leave these instructions with the User.
DATA BADGE LOCATION : Cooker back, serial number repeater badge below oven door opening.
Country of Destination: GB
Gas Electric
Natural Gas 20mbar 220 - 240V 50Hz
Butane 29mbar
Propane 37mbar
(See appliance data badge for test pressures)
Dimensions
Overall height minimum 893mm maximum 920mm
Overall width 1100mm See ‘Positioning of Cooker’
Overall depth 648mm
Space for fixing See ‘Positioning of Cooker’
Minimum space above hotplate 650mm
Connections
Gas: Electric
Rp 1 /
2
at rear right-hand side 220 - 240V 50Hz