Connections, Connecting the antenna terminals, Qr w e – Marantz ST7001 User Manual
Page 12: English, Connecting an fm outdoor antenna, Connecting an am outdoor antenna
8
ENGLISH
CONNECTING THE ANTENNA TERMINALS
CONNECTIONS
ANTENNA
ANTENNA
FM(75
FM(75
Ω
Ω
)
)
GND
GND
AM
AM
XM
2
1
L
R
ANALOG OUT
AC OUTLET
OUT
IN
EXTERNAL
EXTERNAL
INTERNAL
R
L
RS-232C
MODEL
MODEL NO.
NO. ST7001
FLASHER
IN
SWITCHED
100W MAX
REMOTE
CONTROL
AC IN
AC IN
7 AM loop antenna assembly
7 Connection of AM antennas
7 Connecting the antenna wire to
the antenna adaptor
Loosen the screws and attach the wire terminals, then
tighten the screws with a screwdriver.
Direction of
broadcasting
station
75
Ω
/ohms
COAXIAL
cable
FM outdoor antenna
FM indoor antenna (Supplied)
AM loop antenna
(Supplied)
q
r
w
e
Remove the vinyl tie
and take out the
connection line.
Connect to the AM
antenna terminals.
Bend in the
reverse
direction.
a. With the antenna on top
any stable surface.
b. With the antenna attached
to the wall.
Mount
Installation hole Mount on the wall, etc.
1. Push the lever.
2. Insert the
conductor.
3. Return the lever.
Ground
AM outdoor antenna
Use tape or a pin to fasten the tip of
the antenna to the wall, a rack, etc.
Notes
Connecting an FM outdoor antenna
• Keep the antenna away from noise sources (neon signs,
busy roads, etc.).
• Do not put the antenna close to power lines. Keep it well
away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
Connecting an AM outdoor antenna
An outdoor antenna will be more effective if it is stretched
horizontally above a window or outside.
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.