Marantz ST7001 - Manual (Page 29)

25
ENGLISH
The section describes the care and maintenance tasks that
must be performed to optimize the operation of your
Marantz equipment.
7 Cleaning of equipment external
surfaces
The exterior finish of your unit will last indefinitely with
proper care and cleaning, Never use scouring pads, steel
wool, scourging powders or harsh chemical agents (e.g., lye
solution), alcohol, thinner, benzine, insecticide or other
volatile substances as these wil mar the finish of the
equipment. Likewise, never use cloths containing chemical
substances. If the equipment get dirty, wipe the external
surfaces with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in a ratio of
one part detergent to six parts water.
• dip a soft, lint-free cloth in the solution and wring the
cloth till it is damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry cloth.
7 Repairs
Only the most competent and qualified service technicians
should be allowed to service the factory-trained warranty
station personnel have the knowledge and special facilities
needed for repair and calibration of this precision
equipment. After the warranty period has expired, repairs
will be performed for a charge if the equipment can be
returned to normal operation.
In the event of difficulty, refer to your dealer or write directly
to the nearest location to you that is listed on the Marantz
Authorized Service Station list. If writing, please include the
model and serial number of the equipment together with a
full description of what you think is abnormal about the
equipment's behaviour.
OTHERS