Marantz ST7001 - Manual (Page 13)

9
ENGLISH
CONNECTING THE AMPLIFIER
Note
• Do not plug in the mains cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Note that binding pin-plug cords together with mains cords or placing them near a power transformer will result in generating
hum or other noise.
7 Connecting the analog output connector
Use the audio connecting cord to connect the unit with a stereo amplifier or AV amplifier. Do not connect the unit to the PHONO
input connectors on the amplifier.
When making the connections, insert the plugs securely into the connectors. Failure to insert the plugs securely may result in
noise.
CONNECTIONS
ANTENNA ANTENNA
FM(75 FM(75 Ω Ω ) ) GND GND AM AM
XM
2 1
L
R
ANALOG OUT ANALOG OUT AC OUTLET AC OUTLET
OUT OUT
IN
EXTERNAL
INTERNAL
R
L
RS-232C RS-232C
MODEL MODEL NO. NO. ST7001
FLASHER FLASHER IN
SWITCHED SWITCHED
100W MAX 100W MAX
REMOTE
CONTROL
AC IN AC IN
:
(Red) (White) (White)
Audio connecting cord (supplied)
(Red) (White) (White) (Red)
Signal flow
(Red)
Amplifier Recorder for timer recording