Miele KM 5993 - Manual (Page 23)

Booster function
The cooking zones are equipped with a
Single (I) or Twin Boosters (I/II) (see
Guide to the Appliance).
The booster function boosts power so
that large quantities can be quickly
heated, such as water for cooking
pasta. When Booster I is switched on,
the cooking zones operate for
10 minutes with extra power, and when
Booster II is used, for 15 minutes with
extra high power.
The booster function can only be used
on two cooking zones at a time, one of
the left and one on the right.
If the booster function is switched on
when
– no power setting has been selected,
the cooking zone will automatically
revert to setting 12 at the end of the
booster time or if it is switched off
before this.
– a power setting has been selected,
the cooking zone will automatically
revert to the setting selected.
If the cookware is removed from the
heat during the Booster time, the
Booster Function is interrupted. If the
cookware is returned to the cooking
zone within 3 minutes, the Booster time
will resume.
In order to supply the Booster power
needed, another cooking zone will
operate at reduced power while the
Booster Function is on. This means that
the cooking zones are connected
(networked) in pairs, as shown in the
following example:
When the Booster is turned on, the
following takes place:
– if Auto heat is activated on either
zone in the same network, this will be
switched off.
– the power level of the linked cooking
zone will be reduced under certain
conditions.
– When Booster II is switched on, the
linked cooking zone is switched off.
Operation
23