Miele KM 5993 - Manual (Page 30)

Using a Memory program
To achieve the same result when
calling up a memory program, the
same pot must be used. Quantities and
sizes of ingredients must also be the
same.
^ Switch the cooktop on.
^ Touch the M sensor.
P 1 appears in the Timer/Memory
display.
^ Touch the + sensor until the desired
program number is displayed.
^ Touch the M sensor until a long
audible tone zounds.
The associated cooking zone switches
on and then off once the program has
run. While the program is running, the
cooking zone indicator light flashes and
the program number is shown
alternatively with the remaining time.
Checking the steps of Memory
program
^ Switch the cooktop on.
^ Touch the M sensor.
^ Touch the + sensor until the desired
program number is displayed.
The applicable power level appears in
the relevant cooking zone display; the
indicator lamp for that cooking zone
flashes in the Timer/Memory display,
and the time programmed for the power
level appears. Times are displayed
rounded off to the next full minute, but
when the program is running the steps
are timed to the second.
Deleting a Memory program
^ Switch the cooktop on.
^ Touch the M sensor.
^ Touch the + sensor until the desired
program number is displayed.
Touch the - and + sensors at the same
time until a long audible signal sounds
and the dot behind the number goes
out.
Timer and Memory function
30