Miele KM 5993 - Manual (Page 56)

Making the worktop cutout and
installing the cooktop
Granite or marble worktop
e Worktop
f Cooktop
g Gap width
Since the ceramic glass plate and
the worktop cutout have a certain
dimensional tolerance, the gap width
g can vary (min. 1 mm).
^ Make the worktop cutout as shown in
the illustrations.
^ Feed the appliance power cord
downward through the countertop
cut-out.
^ Place the cooktop f in the cutout
and center it.
^ Connect the cooktop.
^ Check that the cooktop is functioning
properly.
^ Spray the remaining gap g with a
temperature-resistant (to at least
160 °C) silicone sealant.
For granite and marble worktops,
use only a silicone sealant that is
suitable for stone worktops and
follow the sealant manufacturer's
instructions.
Flush-fitted cook tops
56