Miele KM 5993 - Manual (Page 32)

Safety lock / System lock
To prevent cooktop and cooking zones
from being inadvertently switched on or
their settings changed, your appliance
is equipped with a safety lock.
The safety lock is activated when the
cooktop is switched on. If it is activated,
the appliance may only be operated to
a limited degree:
– The cooking zone power levels and
the timer settings cannot be
changed.
– The cooking zones and the cooktop
can only be switched off, and then
cannot be switched on again.
The system lock is activated when the
cooktop is switched off. If it is activated,
the appliance cannot be switched on
and the timer cannot be used.
The programming is set so that the
system lock has to be activated
manually. You can change the settings
so that the system lock is activated
automatically five minutes after the
cooktop is switched off (see
"Programming").
If the safety or system lock is activated,
the control light comes on when you
touch a sensor switch.
Both safety and system locks are
deactivated by power outages.
Activation
^ Touch the $ sensor until the
associated indicator light appears.
The indicator light will go out after a
short time.
You can alter the setting from
one-finger to three-finger operation to
make the operation more difficult for
children, for instance (see
"Programming").
Deactivation
^ Touch the $ sensor until the indicator
light goes out.
Safety features
32