Miele KM 5993 - Manual (Page 57)

Solid wood or tiled worktop
a 7.5 mm
(wooden frame - not supplied with
appliance)
e Worktop
f Cooktop
g Gap width
Since the ceramic glass plate and
the worktop cutout have a certain
dimensional tolerance, the gap width
g can vary (min. 1 mm).
^ Make the worktop cutout as shown in
the illustrations.
^ Fix the wooden frame a 7 mm below
the top edge of the worktop (see
illustration).
^ Feed the appliance power cord
downward through the countertop
cut-out.
^ Place the cooktop f in the cutout
and center it.
^ Connect the cooktop.
^ Check that the cooktop is functioning
properly.
^ Spray the remaining gap g with a
temperature-resistant (to at least
160 °C) silicone sealant.
Observe the silicone-sealant
manufacturer's instructions. For
granite- and marble-tiled worktops
use only silicone sealant especially
formulated for granite and marble.
Flush-fitted cook tops
57