Miele KM 5993 - Manual (Page 33)

Stop and Go
Your appliance is equipped with a
feature which when activated reduces
all active cooking zones to level 1. If
you de-activate the feature, the cooking
zones will automatically return to the
previous levels. If the feature is not
de-activated, the cooktop will switch off
after 1 hour.
If you wish to use this feature, you must
first alter the factory setting (see
"Programming").
When "Stop and Go" is activated
- the countdown of a programmed
automatic switch-off time
is interrupted. When deactivated,
the time continues.
- the timer continues to run without
interruption.
- the recording of a
Memory program will be cancelled.
Activate
^ Touch the $ sensor until you hear
two consecutive acoustic signal
tones.
Take care not to continue touching
the
$ sensor too long otherwise the
safety lock will be activated.
The indicator light for the safety lock will
begin to flash. The power of the
cooking zones in use will be reduced to
setting 1 and a
1 will appear in the
corresponding cooking zone display.
Deactivation
^ Touch the $ sensor until the indicator
light goes out.
The cooking zones will continue to
operation at the last levels set.
Safety features
33